• Film Laminate Metal Layered 0.0065” (6.5 mil) Thick Bag. Designed for ESD/EMI/RFI protection, moisture control, high frequency and electrostatic discharge shielding. Meets JEDEC-STD-033B, ANSI/ESD S20.20, and ANSI/ESD S541 specs.
• >30lb Puncture Strength Average per FTMS 101C/4046. Physically protects contents; designed for vacuum sealing
• <10 nJ Energy Penetration Tested per ANSI/ESD STM11.31. Protects contents from ESD charges and discharges. Meets the requirement for static shielding per ANSI/ESD S541, ANSI/ESD S20.20, and EIA 541
• Dissipative Inner and Outer Surfaces Rtt < 1 x 10¹¹ ohms per ANSI/ESD STM11.11. Allows bag to be grounded when placed on a grounded surface
• Vacuum Deposited Metal Layer. Makes the bag softer, more flexible, and less likely to tear or rip during use.
• Lead-free RoHS compliant
• Made in the United States of America

Desco’s bags are recyclable. Mixed unsortable plastic scrap shall contain assorted plastics of multiple grades that are co-extruded, bonded or laminated together which are unsortable into individual grades.

Desco ESD Bags Are Generally Reusable. For best results, bag inventory should be continually replenished. It is recommended that standard packs of bags should be stored in its original packaging in a climate controlled environment where the temperature ranges from 45 degrees F to 70 degrees F and relative humidity is 50%. Bags should not be stored in ultraviolet sunlight, moisture, or heat because the aluminum shielding layer could oxidize if exposed to these conditions.